Sacrificial bracelet anodes Cathodic Protection For Pipelines
Sacrificial bracelet anodes
Sacrificial bracelet anodes typically are either a zinc alloy or an aluminum alloy, depending on the design requirements, environmental variables, and water salinity. Both alloy types were used in the fabrication of the anodes for Stream. Sacrificial bracelet anodes, as a true and tested component, are cost effective and reliable for the cathodic protection of submerged pipelines. These pipelines usually have an anti-corrosion coating and along with a heavy concrete mix for negative buoyancy.
Bracelet anodes are mounted in specific locations determined by the cathodic protection system design, and are connected electrically to the pipeline via special bonding copper cables.
The main defense that the pipeline has against corrosion is the anti-corrosion coating. The bracelet anodes are designed to protect the pipeline where any voids, pits, or other coating failures may occur during installation or during the operating life of the pipeline.
Specifications:
| Standard :GB 4948 or America standard Chemical Composition Analysis (%) | Type | Zn | In | Cd | Sn | Mg | Si | Ti | Impurity ,less than | Al | | Si | Fe | Cu | | Al-Zn-In-Cd A11 | 2.5-4.5 | 0.018-0.050 | 0.005-0.020 | - | - | -- | - | 0.10 | 0.15 | 0.01 | Balance | | Al-Zn-In-Sn A12 | 2.2-5.2 | 0.020-0.045 | - | 0.018-0.035 | - | - | - | 0.10 | 0.15 | 0.01 | Balance | | Al-Zn-In-Si A13 | 5.5-7.0 | 0.025-0.035 | - | - | - | 0.10-0.15 | - | 0.10 | 0.15 | 0.01 | Balance | | Al-Zn-In-Sn-Mg A14 | 2.5-4.0 | 0.020-0.050 | - | 0.025-0.075 | 0.50-1.00 | - | - | 0.10 | 0.15 | 0.01 | Balance | | Al-Zn-In-Mg-Ti A21 | 4.0-7.0 | 0.02-0.050 | - | - | 0.50-1.50 | - | 0.01-0.08 | 0.10 | 0.15 | 0.01 | Balance | Electrochemical characteristics : | Item | Material of anodes | Open-circuit Voltage (v) | Close-circuit Voltage (v) | Actual Capacity(Ah/kg) | Current efficiency (%) | Consumption rate ( kg.(A.a)* | Dissolve Performance | | Electrochemical Performance | Type 1 | -1.18- -1.10 | -1.12- -1.05 | ≥2400 | ≥85 | ≤3.65 | The surface dissolve evenly & oxide drop easily | | Type 2 | -1.18- -1.10 | -1.12- -1.05 | ≥2600 | ≥90 | ≤3.37 | | *Reference electrode: Saturated calomel electrode Type 1: A11,A12,A13,A14 Type 2: A21 | |
Why choose us ?
We are a professional anode supplier over 16 years ,mainly supply:
* Magnesium anodes ( ASTM-G97)
* Zinc anodes (ASTM B418-95 US MILL 18001K)
* Al-Zn-In anodes (GAIII)
* High silicon cast iron anodes ( ASTM-A518-3,BS1591)
Our anodes are shipped worldwide especial main to North America, Asia etc., around 5000mt per year. Our goods are regularly tested by independent third party lab in USA to keep anode continuous high quality. Our plant owns raw material resources ore, so we can supply very good price with service for you.
We can also accept customized anodes with your logo according to your drawing
Other Products you may have interests:
Zinc anodes for Ship, Marine
Zinc Ribbon anodes
Water Heater Anodes
High Silicon Cast Iron Anodes
Magnesium Anodes for underground pipelines,tanks
Product Tags:
|
|
Sacrificial Bracelet Anodes Cathodic Protection For Pipelines Stand-Off Aluminum Anode With Double Cranked Flat Bar Images
|
